Featured Products
-
ODM Factory High Quality Solenoid Valve 2L300-35 Series 2/2-Way High-Temperature Pneumatic Component Metallurgy Industry China Supplier Huatong Pneumatic
Rod seals M1 is suitable for sealing ring with axial moving piston rod, cavity groove can be exchanged with O-ring cavity groove.
Resistant to harsh media and extreme temperatures
Good dry friction characteristics
Static and dynamic friction values are low -
Good Wholesale Vendors China Supplier 2L Series Normally Closed 24V Solenoid Valve
The guiding and sealing functions are achieved by the seals themselves in a very small space.
Suitable for use in mineral oil HFA, HFB and HFC fire resistant hydraulic oils (maximum temperature 60 ℃).
Seals are easy to install
Simple integral piston construction.
The special geometry of the NBR seal element allows installation without distortion in the groove. -
Top Grade 2W-400-40 Plastic Water Solenoid Valve 24 Volt Solenoid Valve
Minimal starting and motion friction, even at low speeds to ensure smooth movement, no crawling phenomenon.
Resistant to wear and tear.
crushing.
High temperature resistant.
Due to the high chemical resistance of the seal ring and the choice of o-rings of different materials, OD seals can be used in almost all media.
Because of the special sealing structure, it has good oil return property. -
Wholesale Price China 2 Way 220V AC 12V 24V Electric Air Water Solenoid Valve
This seal pack is used for harsh and harsh operating conditions. Currently mainly used
In order to meet the needs of providing maintenance spare parts for old equipment.
V-type sealing group EK type,
The EKV can be used for pistons with pressure on one side, or
A “back to back” installation is used for sealing systems with pressure on both sides of the piston.
• Able to withstand extremely harsh conditions
- Long service life
• Can be optimized to adapt to the use of the corresponding equipment
• Even if the surface quality is poor, it can meet the sealing requirements for a period of time
• Not sensitive to contamination of hydraulic media
• There may be occasional leakage under certain conditions for structural design reasons
Occurrence of leakage or friction. -
Wholesale Price Nami Electric Scooter Long Distance Klima Escooter High Power for Adult
Rod seals M1 is suitable for sealing ring with axial moving piston rod, cavity groove can be exchanged with O-ring cavity groove.
Resistant to harsh media and extreme temperatures
Good dry friction characteristics
Static and dynamic friction values are low -
Top Suppliers 2 Axle Tipper Trailer U-Shape Tipper Trailer Hydraulic Cylinder for Semi Trailer
The M2 type seal is a reciprocating seal that can be used for both external and internal circumferential sealing, and is suitable for harsh conditions and special media.
Can be used for reciprocating and rotating movements
Adaptable to most liquids and chemicals
Low coefficient of friction
No crawling even with precise control
High corrosion resistance and dimensional stability
Withstands rapid temperature changes
No contamination of food and pharmaceutical fluids
Can be sterilized
Unlimited storage period -
Discount Price Hydraulic Hollow Plunger Double Acting Mechanical Telescopic Compact Cylinder
The function of A1 type dustproof ring is to prevent dust, dirt, sand and metal chips from entering, through special design, prevent scratching, protect guide parts, prolong the working life of seals. The diameter of interference ensures that the upper seal is tightly packed into the groove, thus preventing the invasion of impurities and moisture. A1 type dustproof ring provides a closed chamber for the cylinder, without screws and brackets, without strict tolerances, and without metal plug-ins, preventing corrosion like metal skeleton dustproof ring may occur. Grooves also do not require strict tolerances.
-
2019 High quality Custom Double Acting Metallurgical Mechanical Engineering Custom High-End Engineering Hydraulic Cylinder
Excellent wear resistance
Impact resistance
Resistance to squeeze out
Small compression deformation
Adapted to the most demanding working conditions
Due to the pressure between the sealing lip introduces the medium and has full lubrication
Improved sealing performance under zero pressure
Excellent protection from outside air
Easy to installIt is mainly used for sealing piston rod and plunger in heavy duty traveling machinery and static pressure.
-
Cheapest Factory Hydraulic Cylinder Factory Supply Cylinders for Mechanical Equipment
Even the use of dust adsorption is very strong, but also has a good dust scraping effect
Wear resistance, long life
It has the function of preserving and reversely transferring residual oil
The use of elastic materials can reduce friction
Standard components conforming to standard grooves -
Fast delivery Hydraulic Stick Cylinder Excavator Mechanical Big Arm Cylinder for Excavator
The dual function of sealing and dustproof is accomplished by a seal.
Reduce processing cost, easy storage. Maximize space savings
Grooves are easy to machinate, thus reducing costs.
No additional axial adjustment is required.
The special design of sealing lip ensures smooth and stable operation.
Because the material is polymer elastomer, thus will not rust, corrosion. -
Factory Cheap Hot High Specification Piston Hydraulic Cylinder for Construction Mechanical
The raised lip on top effectively seals the groove
The reinforcement design with pressure relief function
Low wear and long service life
Suitable for heavy load and high frequency conditions -
Cheapest Factory Tractor End Tipper Dump Truck Semi Trailer 3 Axles Mechanical Suspension Tipping Trailer Factory Outlet Hydraulic Dump Semi Trailer Tipper Hydraulic Cylinder D
Each pressing part of the combined seal ring has excellent performance.
friction
Small wear rate
Use two seal rings to prevent extrusion
The initial interference is designed to protect the seal performance at low pressure
Sealed rectangular geometry is stable
