Featured Products
-
Factory Cheap Hot Tc 5*17*7 Type Standard Oil Seal
Each pressing part of the combined seal ring has excellent performance.
friction
Small wear rate
Use two seal rings to prevent extrusion
The initial interference is designed to protect the seal performance at low pressure
Sealed rectangular geometry is stable -
Supply OEM Piston Compressor Tc Rubber Oil Seal High Temperature Oil Seal
Small groove size.
Minimal starting and motion friction, even at low speed can ensure smooth movement, no crawling phenomenon.
Excellent sliding characteristics
Wear resistance, long service life. -
Chinese wholesale NBR Oil Pump Mechanical Seals
Special wear resistance.
Insensitivity to vibration loads and pressure peaks.
Very compression resistance
It has an ideal sealing effect under no-load and low temperature conditions.
Adapted to the most demanding working conditions -
Factory wholesale Double Column Lifter Accessories Cylinder Oil Seal
Space saving structure
Simple, small installation groove
Due to the use of metal pressing mode of installation, good stability in the groove
When the bearing re-flows oil, the dust scraping lip can automatically open under lower pressure and discharge the dirty oil.
Very wear resistant -
18 Years Factory Va/Vd Water Seal V-Type Rotary Sealing Ring Fluorine Rubber Skeleton Oil Seal Dust, V-Type Sealing Ring
Today, the O-Ring is the most widely used seal because of its inexpensive production methods and its ease of use. We offer you a range of elastomeric materials for both standard and special applications which allow the O-Ring to seal practically all liquid and gaseous media.
-
OEM/ODM Supplier Va Vs Water Seal
Excellent wear resistance
Impact resistance
Resistance to squeeze out
Small compression deformation
Adapted to the most demanding working conditions
Due to the pressure between the sealing lip introduces the medium and has full lubrication
Improved sealing performance under zero pressure
Excellent protection from outside air
Easy to installIt is mainly used for sealing piston rod and plunger in heavy duty traveling machinery and static pressure.
-
Wholesale Chinese Hot-Selling V Ring (VA/VE/VL/VS) Hydraulic Seal (Ozone resistance)
Space saving structure
Simple, small installation groove
Due to the use of metal pressing mode of installation, good stability in the groove
When the bearing re-flows oil, the dust scraping lip can automatically open under lower pressure and discharge the dirty oil.
Very wear resistant -
Wholesale OEM China Factory Direct Rubber Va V Rings
For different liquid and temperature range, but by choosing to know when the material to control.
By changing or adjusting the axial preload (slot or ring head screw) can adapt to special working conditions.
Due to the stability of forming, it is not sensitive to high pressure peak.
Compared with single seal, the pollution of the medium and the slightly damaged sliding surface is not sensitive.
Due to the contact area and there are several sealing lip, it has excellent sealing performance.
Seals can be cut to facilitate installation. Therefore, in the case of maintenance or repair, there is no need to remove the cylinder completely. -
Wholesale OEM China Factory Direct Rubber Va V Rings
For different liquid and temperature range, but by choosing to know when the material to control.
By changing or adjusting the axial preload (slot or ring head screw) can adapt to special working conditions.
Due to the stability of forming, it is not sensitive to high pressure peak.
Compared with single seal, the pollution of the medium and the slightly damaged sliding surface is not sensitive.
Due to the contact area and there are several sealing lip, it has excellent sealing performance.
Seals can be cut to facilitate installation. Therefore, in the case of maintenance or repair, there is no need to remove the cylinder completely. -
Leading Manufacturer for Hydraulic Pump High Pressure Skeleton Tcn Oil Seal for Excavator
This seal pack is used for harsh and harsh operating conditions. Currently mainly used
In order to meet the needs of providing maintenance spare parts for old equipment.
V-type sealing group EK type,
The EKV can be used for pistons with pressure on one side, or
A “back to back” installation is used for sealing systems with pressure on both sides of the piston.
• Able to withstand extremely harsh conditions
- Long service life
• Can be optimized to adapt to the use of the corresponding equipment
• Even if the surface quality is poor, it can meet the sealing requirements for a period of time
• Not sensitive to contamination of hydraulic media
• There may be occasional leakage under certain conditions for structural design reasons
Occurrence of leakage or friction. -
ODM Supplier NBR/FKM Tg4 Double Lip Oil Seal for Reciprocating-Shaft Applications
Mechanical Face Seals or heavy duty seals are specifically engineered for rotating applications in extremely arduous environments where they withstand severe wear and prevent ingress of harsh and abrasive external media. A Mechanical Face Seal is also known as Heavy Duty Seal, Face Seal, Lifetime Seal, Floating Seal, Duo Cone Seal, Toric Seal.
-
OEM China Silicone O Ring Kit, NBR O Ring Kit, FKM O Ring Kit, Rubber O Ring Kit (3A5012)
Rod seals M1 is suitable for sealing ring with axial moving piston rod, cavity groove can be exchanged with O-ring cavity groove.
Resistant to harsh media and extreme temperatures
Good dry friction characteristics
Static and dynamic friction values are low
