Featured
-
Rod seals M1 are single acting reciprocating seals – Yimai
M1 piston rod seal is a kind of reciprocating motion seal which can be used for both external and internal sealing. This seal can be suitable for harsh working conditions, but also to meet the requirements of some special media. The M1 piston rod seal is a single-acting seal consisting of a U-shaped housing and a V-shaped corrosion resistant spring. Its contour shape is asymmetric, and its seal working lip has the best short and thick characteristics, thus reducing friction and extending life... -
OEM/ODM China Rod Packing Seal - Rod seals OD for control cylinders and servo systems – Yimai
The preloaded piston rod seal must be free of dynamic leakage to the atmospheric side under all operating conditions and must be a sound static seal when the machine is stopped . In addition to reducing friction to improve mechanical efficiency, and to be easy to install in small grooves. Cost and service life must meet the high expectations of users. With the introduction of OD, for the first time, we are able to use multiple seals. This series sealing system provides good static and dynamic... -
2022 New Style Polyformaldehyde Guide Ring - High quality O-ring seals manufacturer – Yimai
TECHNICAL DRAWING The perfect O-Ring for each purpose Our O-Rings are both cost-effective and perform highly in almost every environment. No matter if you need metric or inch, standard or custom-made O-Rings – any size of O-Ring seals is available – including giant O-Rings using our process. Our rubber O-Rings are made of EPDM, FKM, NBR, HNBR, as well as our proprietary FFKM. Special products apart from rubber O-Rings such as O-Rings in PTFE material and metal O-Rings are also available.... -
High Quality Polytetrafluoroethylene And Copper Powder Guide Ring - Piston Guide Ring KB – Yimai
When the temperature is below 120 ℃, allowing the surface pressure can be up to 50 n/m ㎡’ve put the guide sleeve and the piston and the piston to pick some times to allow surface pressure between planes, to allow specific pressure on the surface of guide sleeve, has considered the nonlinear distribution of contact pressure on the surface of the it is made of load, temperature, and manufacturing tolerance factor. DoubleActing Helix Oscillating Reciprocating Rotary SingleActing St... -
2022 Good Quality Pneumatic Seals FEL - Pneumatic Seals EM – Yimai
The EM type piston rod seal/dust ring is designed in combination with the EL type geometry we have tried and proved, which meets the requirements of small cylinders, namely the EM type is smaller in size and less friction. Installation: EM type self-positioning piston rod seal/dust seal can be manually or automatically fitted into the groove when the piston rod is not fitted. Take care to prevent damage to the dust and seal lips by sharp edges during assembly. Initial lubrication is a prerequ... -
China wholesale Static Radial Seal - Back-Up Ring is the pressure seal – Yimai
The experimental results show that the retainer ring has longer service life and higher reliability than the retainer ring of the modified type, and the working pressure range of the O-ring is expanded. DoubleActing Helix Oscillating Reciprocating Rotary SingleActing Static Ø – Range Pressure Range Temp Range Velocity 0～5000 ≤800 bar -55～+260℃ ≤ 0.5 m/s -
2022 China New Design Pneumatic Cylinder Rod Seal - Rod seals U-Ring B3 – Yimai
Installation This kind of seal should have an axial gap. In order to avoid damage to the sealing lip, do not pull the seal on the sharp edge when installing. These seals usually fit in closed grooves and require special installation tools where access is restricted. Upon request, the company will provide the design of such tools. Material polyurethane based material with A Shore hardness of about 93. Compared with other polyurethane materials on the market at present, its main advantages are ... -
Good quality Piston Rotary Glyd Seals HXN - Piston Seals CST – Yimai
DoubleActing Helix Oscillating Reciprocating Rotary SingleActing Static Ø – Range Pressure Range Temp Range Velocity 30～600 ≤500 bar -40～+110℃ ≤ 1.2 m/s The combined seal ring adopts a unique sealing material and geometry, which is a polytetrafluoroethylene combined seal ring exerted by an elastomer. The combined seal ring is assembled in a superposition into a compact structure with good performance and can be installed in a single piston groove. Its geometry provides... -
100% Original Shaft With Rotary Oil Seal - Custom Radial rubber oil seals SB – Yimai
TECHNICAL DRAWING Product Features Oil seal edge: metal frame, machined The sealing lip is equipped with a spring Sealing lip lip section, sealing lip formed by mold pressing Recommended Industrial gearbox Axis (moderate pollution) Electric tools Product Advantages Oil Seals SB outer edge of the Oil seal is metal, and the inner wall of the skeleton includes a single lip with a spring. Oil Seals are suitable for high speed, harsh sealing environment, and multi-piece assembly. Oil Seals have t... -
Special Design for Shearer Planetary Gear Seal - High quality O-ring seals manufacturer – Yimai
TECHNICAL DRAWING The perfect O-Ring for each purpose Our O-Rings are both cost-effective and perform highly in almost every environment. No matter if you need metric or inch, standard or custom-made O-Rings – any size of O-Ring seals is available – including giant O-Rings using our process. Our rubber O-Rings are made of EPDM, FKM, NBR, HNBR, as well as our proprietary FFKM. Special products apart from rubber O-Rings such as O-Rings in PTFE material and metal O-Rings are also available.... -
PriceList for Sealing Function - V-ring VS also known as V-shaped rotary seal – Yimai
TECHNICAL DRAWING V-ring VS can be stretched open directly installed on the shaft, fixed by the internal tension of the rubber body. It as the axis of rotation axis in the direction of vertical pressure shaft surface static sealing effect, the dynamic seal friction surface can be bearing wall, or washers, stamping parts, bearing, and even metal skin oil seal, the sealing lip is flexible, and only relatively small contact pressure to the friction surface, but enough to keep the sealing functi... -
Best quality Medium Temperature Oil Seal - The radial oil seal SC – Yimai
TECHNICAL DRAWING Product Features Outer edge of oil seal: rubber wrapping The sealing lip is fitted with a spring The front end face of the sealing lip is machined Sealing lip molding finished Recommended Industrial gearbox Axis (moderate pollution) Electric tools Scope of Application Axis with skeleton oil seal is widely used in processing industry, mechanical engineering and equipment used in the motor and gear axis seal, mill and heavy in the mechanical transmission parts, stretching the...
